Compounds

 

HI-SET

A fast setting easy sanding joint compound. Which may be used for all operations preceding the final coat in finishing joints, concealing nail heads and corner bead in gypsum wall board construction. Designed to set-up under the worst conditions, it also has superior adhesion and virtually no shrinkage.

EZ-Mix HI-SET

An easy mixing fast setting easy sanding joint compound. Which may be used for all operations proceeding the final coat in finishing joints, concealing nail heads and corner bead in gypsum wall board construction. Designed to set-up under the worst conditions, it also has superior adhesion and virtually no shrinkage.

Sure Strength

Sure Strength is a super hard, fast setting chemically harden joint compound. Which may be used for all operations proceeding the final coat in finishing joints, concealing nail heads and corner bead in gypsum wall board construction. Sure Strength is designed to setup under the worst drying conditions, it also has superior adhesion and virtually no shrinkage. Because of this products extremely hard set,it is ideal for taping manufactured homes which often crack joints during transport.

M1100, X47

A powdered non-aggregated Texture product, easily mixed with water to desired texturing consistency. Can be thinned to yield thin, medium, and heavy textures. Because of its excellent coverage it can be used to conceal minor surface defects. It is designed for interior walls and ceilings that are to be painted.

M1200, M500, M700, M710

Ready-Mixed formula used to embed tape, finish joints, and texture gypsum wallboard. Factory mixing eliminates problems normally associated with job mixed dry products. Provides excelent slip and workability. Available in heavy, medium and maching consistency.

	M25 Shurbond M-25 is a fast setting joint cement compound. Which may be used for all operations proceeding the final coat in finishing joints, concealing nail heads and corner bead in gypsum wallboard construction. M-25 surebond is designed to setup under the worst drying conditions, it also has superior adhesion and virtually no shrinkage.
	M1000 Ceiling texture Dry styrofoam aggregate powder provides maximum hide over gypsum wallboard, joints and dimples. Excellent texture coverage over concrete ceilings. Fine, medium or coarse in 35il. bag/ 50 per pallet.
	M300 A powdered non-aggregated texture and joint cement. It can be easily mixed with water to desired texturing and taping consistency. Because of its excellent coverage it can be used to conceal minor surface defects. It is designed for interior walls and ceilings that are to be painted.
	M100 A powdered all pourpose joint cement and texture compound formulated with inert fillers and natural bindres only. It does not contain any preservatives or slow releasing compounds. It mixes easily with tap water.
	M105 A ready-mixed, low shrinkage, easily applied and sanded joint cement recommended for top coating taping compounds (M1200, M700 etc.)
	M600 Spray Texture 50lb. box/ 50 per pallet. Premixed formulation gives many mechanical spray effects over gypsum wallboard. Apply in light orange peel coat, or splatter on and knock down with trowel.

817-626-1987